Has it ever occurred to you that the more you perform maintenance exercises on your mulcher teeth, the more you will enjoy the best service and performance? Indeed, it is for you to ensure that the necessary maintenance exercises are always conducted. Unfortunately, some mulcher owners do not have a slight idea of what they can do to keep their Quadco teeth for mulchers in good condition. If you are having some challenges in maintaining your Quadco teeth for mulcher, then here are some important tips you can utilize:

Sharpen Regularly

Yes! It is obvious that the more the Quadco teeth operate, the higher the likelihood of turning blunt fast. This means that when the teeth turn blunt, there will be a major challenge as far as operations are concerned. In this regard, enhanced performance of your mulcher teeth can be achieved when sharpening is done regularly. That way, there will be a minimal strain during operations.

Use The Right Sharpening File

One thing is guaranteed…that different Quadco teeth cannot be sharpened using the same file. In essence, the sharpening file chosen must fit the mulcher teeth in question perfectly in terms of size and shape. In this case, you are required to strictly work with the right sharpening file failure, to which you might end up ruining the performance of your Quadco teeth. Using the right sharpening file means that you will maintain consistency in terms of sharpness, and the overall performance will be maintained.

Clean After Use

Considering that Quadco teeth are meant for forestry mulching, it becomes rather obvious that the teeth are likely to be exposed to unfavorable stains, some of which may react badly with the metal used in making the teeth. It is therefore recommended that you should clean the mulcher teeth frequently, and most preferably after use.

Keep Dry

Another way of ensuring that the performance of the Quadco teeth for your mulcher remains in a good state is by keeping the blade dry even after use. Clean thoroughly and keep the mulcher teeth dry at all times to avoid possible lasting and corrosion.