Cylinder engraving is a very intricate process that requires you to get everything right. If you make a simple mistake, the entire engraving will be damaged, and this will cost you a lot in terms of material and time wastage. So, what the most important things you need to consider when it comes to cylinder engraving? Here are some of the best tips that you need to consider

Understand the Cylinder Material

The first thing you need to consider is the cylinder materials. Make sure that you have understood the kind of material used because it will greatly determine the kind of engraving you will do. Some of the materials are weak for engraving that you might need to do a large coating of the surface before engraving to avoid damaging the upper layer. The size of the layers is usually determined by the strength of the beam.

Understand Needed Beam Strength

The other thing you need to consider when doing cylinder engraving is the strength of the beam. This is a very crucial factor to consider, and if you want to get the most out of the engraving, you must be able to set the right bean for the kind of substrate is on the cylinder. If you are engraving a copper or zinc layer, you must be ready to get the most out of the machine. So, make sure that you have understood the capacity of the machine regarding the strength of the beam.

Understand the Process

The other thing that you need to get right is the process of cylinder engraving. This is a very crucial factor, especially if you are engraving for the first time. Make sure that you have every bit of the process at your fingertips, from the preparation of the cylinder to that of the laser engraving machine. This is a very important factor if you want to get the most out of the process. If doing it for the first time, get some training.

Making Engraving the Substrate Matters

Understand the right substrate you need for cylinder engraving. There are kinds of substrates using on the cylinder, but all have different features. If it’s copper, it needs different features from zinc. So get this right.

Treating the Cylinder

With the cylinder engraving done, you need to treat the cylinder to retain the engraving image for a longer time. Chroming is the process used for treating cylinder, especially if the engraving was done on a metallic surface such as copper.