These Are Common Areas Cold Forging Is Being Used

Cold forging is one of the forging methods that is widely applied in the market. There are so many industries that are depending on this industry for the production and wear parts. Most of the machines you see around, including electronics, have cold forged parts.

As mentioned, there are so many areas where cold forging can be applied. In this post, we are going to look at some of the areas where you are likely too cold forged parts. Check out the following:

Mechanical Machining

This is one of the areas cold forged parts are widely used. A majority of the wear parts for the milling, drilling, grinding, etc., are made from cold forging. From the road milling and drilling bits, they have most of their parts mode from cold forging. This is unless the material used to make them is very hard for cod forging.

Hydraulic Industry

The hydraulic industry is growing pretty due to the increasing demand in the pressing industry. If you look at the products hydraulic press machines, you will notice that most of the parts, especially the frame forged.

Agricultural Machines

If you are in the agriculture industry, you must have seen the machine used, such as the tractors, tractor attachments, and working machines. Most of these machines have most of their parts cold forged. Just look at them, and you will see that these machines have a lot of metallic parts and sheets, and most of them are forged.

Industry Of Heavy Construction Machinery

Whether you are talking about excavators, Bobcats, folk lifts, or any other machinery used in the construction industry, you will find out most of their parts are cold-forged. This is in areas where cold forging is being used. Even most of the construction materials are cold-forged.

Automotive Industry

The automotive industry and the forging industry are like Siamese Twins. They go together. All the vehicles on our roads have a good number of parts cold forged. In fact, with the advancing technology and demand for light cars, most manufacturers are adopting softer metals, increasing the use of cold forging.

Military Industry

The military is machinery, and weapons is another area where cold forging is increasingly being used. Most of the machines, including vehicles, jets, and much metallic equipment, are forged, and cold forging is one of the largely used techniques. There are just a few areas where cold fording technology is widely applied.

Buyers’ Tips For Choosing Hydraulic Press Supplier

For buyers going to the market for hydraulic presses, you need to be very careful about what you select. There many products available in the market courtesy of the ever-increasing number of suppliers. But you need to be very careful when choosing a manufacturer because there are some that may not provide you with the quality you expect.

There are many good hydraulic press suppliers in the market, though. You just need to be selective when picking on by simply looking at their traits. This article will help you choose the best hydraulic press supplier.

You can also click to read more on the good hydraulic press suppliers. Here are some of the best tips or the things you need to look for in these suppliers:

Long Experience

The very first thing you need to look out for is the experience that the hydraulic press supplier has in the market. The longer the period of time that they have been in the market, the better. The importance of experience is that it gives the manufacturer time to fine-tune their system. Therefore, the production has very few or no faults that could affect the quality of the products.

Machine Quality

The other thing you need to look for when selecting a hydraulic press supplier is the quality of the machines. What is the quality of the machine does the supplier provide? This is an important factor to consider. You need to know everything that determines machine quality, including the material used and the technology. The better the quality of the material and technology, the better is the quality of the machines.

Good Reputation

A good hydraulic press supplier is one that built a good reputation in the market. This is an important trait to look for in all suppliers. Understand what the market says about their products. Have has the hydraulic press supplier products impacted the market? Are the users happy? This is what makes reputation. If the prior buyers are happy, then they are good to work with.

Affordable

The affordability of the hydraulic press supplier products is another factor that makes them a good choice for buyers. Everyone is looking for ways that they can reduce the cost of buying machines. Understand the market and the prices that the hydraulic press you need are going for. With this, it will be easy to find out which supplier is offering you the best deal.

This Is How Blunt Wood Chipper Blades Affects Your Operations

Most people have this habit of working with their wood chipper blades for a long time without sharpening. What happens is that the blades become dull and blunt, and their cutting efficiency is reduced.

What most wood chipper users don’t know is that operating with blunt have a negative impact on their machine and operations. In this guide, we are going to look at how blunt wood chipper blades affect your operation. Read the following tips:

Stress On The Blade Bolts And Fasteners

When you are working with blunt teeth, the cutting efficiency is low, and this means that the stress on the tips will be transferred to the other parts of the teeth. In this case, the bolts and fasteners are the recipients of the stress. This causes their failure to keep the blades in place by loosening. So if your wood chipper blades’ bolt is loosening, you need to check for blunt.

Excessive Fuel Consumption

Have you needed that your wood chipper is consuming excess fuel? Well, the problem could be blunt teeth. This comes as a result of reduced cutting performance of the blades, which causes the machine to work harder to compensate for the ineffective cutter tools. In the process, the engine consumes a lot of fuel. So, you need to have the wood chipper blades sharpened.

Increased Premature Parts’ Failure

This is common in wood chippers’ wear parts when you have blunt and dull wood chipper blades. The accelerated belt, bearing and clutch are the main parts that wear and experience premature failure when running on blunt blades. The stress from the blade tips is transferred to the parts, making them work harder hence the high rate of wear and tear.

Unnecessarily Harsh Vibration

If the wood chipper has been developing unnecessary harsh vibrations, you need to check the condition of the blades. This is an important factor to consider because blunt blades are usually uneven, and in most cases, they cause harsh vibration. Sharpen them and keep them uniform.

High Maintenance Cost

Working with blunt wood chipper blades usually increase the rate of wear and tear of the entire machine. Therefore, the cost of maintaining the machine will be very high. You will be replacing most of the parts frequently, which can be costly.

Apart from sharpening your chipper blades, you also need to buy quality blades to reduce the rate of wear. Check out JYFMachinery for some of the best quality wood chipper blades.

User Guide: How To Sharpen Wood Chipper Blades

How do you sharpen your wood chipper blades? Well, if you are new in the woodchipping industry, this guide is for you. We have put together some of the basic tips for proper sharpening of the wood chipper blades.

Before we go to that, it is important to mention that you need quality wood chipper blades to keep the sharpness for longer. So the supplier matters. If you are buying blades, click for info about one of the suppliers of wood chipper blades. Check out their range.

Here are the main steps for sharpening wood chipper blades:

STEP 1: Get Sharpening Tools

The first step should be assembling the sharpening tools. Depending on the kind of wood chipper blades you are using, you have a range of tools that you need. But some of the most common and must have tools includes: manual hand sander, disc sander, wet grinder, belt sander, angle grinder and bench mounted sander. With these tools, you are ready for work.

STEP 2 – Clean the Blades

The second step is cleaning the wood chipper blades. You can start with water and soap, but for a thorough cleaning, you need sandpaper or a grinding wheel with very fine grit to remove the sticky debris and parts on the teeth

STEP 3 – Sharpen The Blades

With the cleaning and sanding of the blades, you can start with the sharpening process. There are several things that you need to get right. First, you need to maintain the blades’ factory cutting angle. In most cases, the angle can anywhere from 30 to 45 degrees. Remove the material slowly and avoid going below the blade height.

STEP 4 – Remove Burr From Back Of The Blades

With sharpening already done, you need now to remove the burr from the tips of the wood chipper blades. The burr is a by-product of sharpening, and for the blades to cut effectively, you need to remove it for the teeth to cut effectively.

STEP 5 – Balance The Blades

With the blades sharpened, you can now place them back to the chipper and ensure that they are properly balanced. This is important because poorly balanced blades will be inefficient to cut and could cause low-quality chipping. With that, your wood chipper blades will be ready for work. That’s how you can sharpen your blades, even at home.